인프런 커뮤니티 질문&답변
작성한 질문수
vagrant up으로 설치하는 도중 kubeadm init 관련 오류
작성
·
350
1
안녕하세요.
강의 1.2 코드로 쉽게 구성하는 쿠버네티스 랩 환경 구축 도중 에러가 발생해서 질문 드립니다.
아래의 캡처 화면 처럼 m-k8s-1.20 가상머신은 정상적으로 설치된 거 같고 그 이후에 master-node.sh 실행에서 문제가 발생하는 것 같습니다. kubeadm init ~~ 하는 부분에서 아래처럼 오류가 나타나는데 이유를 알 수 있을까요?
답변 2
0
사실 오전부터 정말 여러번 다 지웠다가 설치했다를 반복해봤는데도 저기서 계속 문제가 발생하네요.ㅠㅠ
그림으로 배우는 쿠버네티스 강의 들을 때도 똑같이 kubeadm init에서 저 에러가 발생하더라구요
일단 저녁에 다시 한 번 다 지우고 시도해볼게요.
아래의 내용을 보면 gcr.io나 스크립트 상의 문제는 없는거 같아요.
❯ ls -rlt
total 8
drwxr-xr-x 4 mz01-hj staff 128 May 24 10:21 ch1
drwxr-xr-x 7 mz01-hj staff 224 May 24 10:21 ch2
drwxr-xr-x 5 mz01-hj staff 160 May 24 10:21 ch4
drwxr-xr-x 4 mz01-hj staff 128 May 24 10:21 ch5
drwxr-xr-x 5 mz01-hj staff 160 May 24 10:21 ch6
drwxr-xr-x 7 mz01-hj staff 224 May 24 10:21 ch8
-rw-r--r-- 1 mz01-hj staff 978 Sep 9 15:11 README.md
❯ cd ch1
❯ ls
1.2 1.3
❯ cd 1.2
❯ ls
k8s-min-5GiB
❯ cd k8s-min-5GiB
❯ ls -rlt
total 40
-rw-r--r-- 1 mz01-hj staff 2154 May 24 10:21 Vagrantfile
-rw-r--r-- 1 mz01-hj staff 1395 May 24 10:21 k8s_env_build.sh
-rw-r--r-- 1 mz01-hj staff 475 May 24 10:21 k8s_pkg_cfg.sh
-rw-r--r-- 1 mz01-hj staff 1023 May 24 10:21 master_node.sh
-rw-r--r-- 1 mz01-hj staff 174 May 24 10:21 work_nodes.sh
❯ vagrant up
==> vagrant: A new version of Vagrant is available: 2.2.18 (installed version: 2.2.16)!
==> vagrant: To upgrade visit: https://www.vagrantup.com/downloads.html
Bringing machine 'm-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w1-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w2-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w3-k8s-1.20' up with 'virtualbox' provider...
==> m-k8s-1.20: Importing base box 'sysnet4admin/CentOS-k8s'...
==> m-k8s-1.20: Matching MAC address for NAT networking...
==> m-k8s-1.20: Checking if box 'sysnet4admin/CentOS-k8s' version '0.7.4' is up to date...
==> m-k8s-1.20: Setting the name of the VM: m-k8s-1.20(github_SysNet4Admin)
==> m-k8s-1.20: Clearing any previously set network interfaces...
==> m-k8s-1.20: Preparing network interfaces based on configuration...
m-k8s-1.20: Adapter 1: nat
m-k8s-1.20: Adapter 2: hostonly
==> m-k8s-1.20: Forwarding ports...
m-k8s-1.20: 22 (guest) => 60010 (host) (adapter 1)
==> m-k8s-1.20: Running 'pre-boot' VM customizations...
==> m-k8s-1.20: Booting VM...
==> m-k8s-1.20: Waiting for machine to boot. This may take a few minutes...
m-k8s-1.20: SSH address: 127.0.0.1:60010
m-k8s-1.20: SSH username: vagrant
m-k8s-1.20: SSH auth method: private key
m-k8s-1.20: Warning: Connection reset. Retrying...
m-k8s-1.20: Warning: Remote connection disconnect. Retrying...
m-k8s-1.20: Warning: Connection reset. Retrying...
m-k8s-1.20: Warning: Remote connection disconnect. Retrying...
m-k8s-1.20: Warning: Connection reset. Retrying...
m-k8s-1.20: Warning: Remote connection disconnect. Retrying...
m-k8s-1.20:
m-k8s-1.20: Vagrant insecure key detected. Vagrant will automatically replace
m-k8s-1.20: this with a newly generated keypair for better security.
m-k8s-1.20:
m-k8s-1.20: Inserting generated public key within guest...
m-k8s-1.20: Removing insecure key from the guest if it's present...
m-k8s-1.20: Key inserted! Disconnecting and reconnecting using new SSH key...
==> m-k8s-1.20: Machine booted and ready!
==> m-k8s-1.20: Checking for guest additions in VM...
m-k8s-1.20: The guest additions on this VM do not match the installed version of
m-k8s-1.20: VirtualBox! In most cases this is fine, but in rare cases it can
m-k8s-1.20: prevent things such as shared folders from working properly. If you see
m-k8s-1.20: shared folder errors, please make sure the guest additions within the
m-k8s-1.20: virtual machine match the version of VirtualBox you have installed on
m-k8s-1.20: your host and reload your VM.
m-k8s-1.20:
m-k8s-1.20: Guest Additions Version: 5.2.12
m-k8s-1.20: VirtualBox Version: 6.1
==> m-k8s-1.20: Setting hostname...
==> m-k8s-1.20: Configuring and enabling network interfaces...
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /var/folders/57/629sgzyn5wng9wyrwry2325m0000gn/T/vagrant-shell20210909-63680-1nlbh83.sh
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Determining fastest mirrors
m-k8s-1.20: * base: mirror.navercorp.com
m-k8s-1.20: * extras: mirror.navercorp.com
m-k8s-1.20: * updates: mirror.navercorp.com
m-k8s-1.20: Package yum-utils-1.1.31-54.el7_8.noarch already installed and latest version
m-k8s-1.20: Nothing to do
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
m-k8s-1.20: grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
m-k8s-1.20: repo saved to /etc/yum.repos.d/docker-ce.repo
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /var/folders/57/629sgzyn5wng9wyrwry2325m0000gn/T/vagrant-shell20210909-63680-phklr.sh
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.navercorp.com
m-k8s-1.20: * extras: mirror.navercorp.com
m-k8s-1.20: * updates: mirror.navercorp.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package epel-release.noarch 0:7-11 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: epel-release noarch 7-11 extras 15 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package
m-k8s-1.20: Total download size: 15 k
m-k8s-1.20: Installed size: 24 k
m-k8s-1.20: Downloading packages:
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : epel-release-7-11.noarch 1/1
m-k8s-1.20:
m-k8s-1.20: Verifying : epel-release-7-11.noarch 1/1
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: epel-release.noarch 0:7-11
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.navercorp.com
m-k8s-1.20: * epel: mirrors.bestthaihost.com
m-k8s-1.20: * extras: mirror.navercorp.com
m-k8s-1.20: * updates: mirror.navercorp.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package vim-enhanced.x86_64 2:7.4.629-8.el7_9 will be installed
m-k8s-1.20: --> Processing Dependency: vim-common = 2:7.4.629-8.el7_9 for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(:MODULE_COMPAT_5.16.3) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: libperl.so()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: libgpm.so.2()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package gpm-libs.x86_64 0:1.20.7-6.el7 will be installed
m-k8s-1.20: ---> Package perl.x86_64 4:5.16.3-299.el7_9 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl-macros for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Getopt::Long) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Temp) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Spec::Unix) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Spec::Functions) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Spec) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Path) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Exporter) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Cwd) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: ---> Package perl-libs.x86_64 4:5.16.3-299.el7_9 will be installed
m-k8s-1.20: ---> Package vim-common.x86_64 2:7.4.629-8.el7_9 will be installed
m-k8s-1.20: --> Processing Dependency: vim-filesystem for package: 2:vim-common-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
m-k8s-1.20: ---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
m-k8s-1.20: ---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
m-k8s-1.20: ---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Filter.x86_64 0:1.49-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Getopt-Long.noarch 0:2.40-3.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-3.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-3.el7.noarch
m-k8s-1.20: ---> Package perl-PathTools.x86_64 0:3.40-5.el7 will be installed
m-k8s-1.20: ---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
m-k8s-1.20: ---> Package perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 will be installed
m-k8s-1.20: ---> Package perl-Socket.x86_64 0:2.010-5.el7 will be installed
m-k8s-1.20: ---> Package perl-Storable.x86_64 0:2.45-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Time-HiRes.x86_64 4:1.9725-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
m-k8s-1.20: ---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
m-k8s-1.20: ---> Package perl-macros.x86_64 4:5.16.3-299.el7_9 will be installed
m-k8s-1.20: ---> Package perl-threads.x86_64 0:1.87-4.el7 will be installed
m-k8s-1.20: ---> Package perl-threads-shared.x86_64 0:1.43-6.el7 will be installed
m-k8s-1.20: ---> Package vim-filesystem.x86_64 2:7.4.629-8.el7_9 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Encode.x86_64 0:2.51-7.el7 will be installed
m-k8s-1.20: ---> Package perl-Pod-Escapes.noarch 1:1.04-299.el7_9 will be installed
m-k8s-1.20: ---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
m-k8s-1.20: ---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
m-k8s-1.20: ---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
m-k8s-1.20: ---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: vim-enhanced x86_64 2:7.4.629-8.el7_9 updates 1.1 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: gpm-libs x86_64 1.20.7-6.el7 base 32 k
m-k8s-1.20: perl x86_64 4:5.16.3-299.el7_9 updates 8.0 M
m-k8s-1.20: perl-Carp noarch 1.26-244.el7 base 19 k
m-k8s-1.20: perl-Encode x86_64 2.51-7.el7 base 1.5 M
m-k8s-1.20: perl-Exporter noarch 5.68-3.el7 base 28 k
m-k8s-1.20: perl-File-Path noarch 2.09-2.el7 base 26 k
m-k8s-1.20: perl-File-Temp noarch 0.23.01-3.el7 base 56 k
m-k8s-1.20: perl-Filter x86_64 1.49-3.el7 base 76 k
m-k8s-1.20: perl-Getopt-Long noarch 2.40-3.el7 base 56 k
m-k8s-1.20: perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
m-k8s-1.20: perl-PathTools x86_64 3.40-5.el7 base 82 k
m-k8s-1.20: perl-Pod-Escapes noarch 1:1.04-299.el7_9 updates 52 k
m-k8s-1.20: perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
m-k8s-1.20: perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
m-k8s-1.20: perl-Pod-Usage noarch 1.63-3.el7 base 27 k
m-k8s-1.20: perl-Scalar-List-Utils x86_64 1.27-248.el7 base 36 k
m-k8s-1.20: perl-Socket x86_64 2.010-5.el7 base 49 k
m-k8s-1.20: perl-Storable x86_64 2.45-3.el7 base 77 k
m-k8s-1.20: perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
m-k8s-1.20: perl-Time-HiRes x86_64 4:1.9725-3.el7 base 45 k
m-k8s-1.20: perl-Time-Local noarch 1.2300-2.el7 base 24 k
m-k8s-1.20: perl-constant noarch 1.27-2.el7 base 19 k
m-k8s-1.20: perl-libs x86_64 4:5.16.3-299.el7_9 updates 690 k
m-k8s-1.20: perl-macros x86_64 4:5.16.3-299.el7_9 updates 44 k
m-k8s-1.20: perl-parent noarch 1:0.225-244.el7 base 12 k
m-k8s-1.20: perl-podlators noarch 2.5.1-3.el7 base 112 k
m-k8s-1.20: perl-threads x86_64 1.87-4.el7 base 49 k
m-k8s-1.20: perl-threads-shared x86_64 1.43-6.el7 base 39 k
m-k8s-1.20: vim-common x86_64 2:7.4.629-8.el7_9 updates 5.9 M
m-k8s-1.20: vim-filesystem x86_64 2:7.4.629-8.el7_9 updates 11 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package (+30 Dependent packages)
m-k8s-1.20: Total download size: 18 M
m-k8s-1.20: Installed size: 60 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 2.8 MB/s | 18 MB 00:06
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : 1:perl-parent-0.225-244.el7.noarch 1/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-HTTP-Tiny-0.033-3.el7.noarch 2/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-podlators-2.5.1-3.el7.noarch 3/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Pod-Perldoc-3.20-4.el7.noarch 4/31
m-k8s-1.20:
m-k8s-1.20: Installing : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 5/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Encode-2.51-7.el7.x86_64 6/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Text-ParseWords-3.29-4.el7.noarch 7/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Pod-Usage-1.63-3.el7.noarch 8/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-macros-5.16.3-299.el7_9.x86_64 9/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Storable-2.45-3.el7.x86_64 10/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Exporter-5.68-3.el7.noarch 11/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-constant-1.27-2.el7.noarch 12/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Socket-2.010-5.el7.x86_64 13/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Time-Local-1.2300-2.el7.noarch 14/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Carp-1.26-244.el7.noarch 15/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-PathTools-3.40-5.el7.x86_64 16/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Scalar-List-Utils-1.27-248.el7.x86_64 17/31
m-k8s-1.20:
m-k8s-1.20: Installing : 1:perl-Pod-Simple-3.28-4.el7.noarch 18/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-File-Temp-0.23.01-3.el7.noarch 19/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-File-Path-2.09-2.el7.noarch 20/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-threads-shared-1.43-6.el7.x86_64 21/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-threads-1.87-4.el7.x86_64 22/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 23/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Filter-1.49-3.el7.x86_64 24/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-libs-5.16.3-299.el7_9.x86_64 25/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Getopt-Long-2.40-3.el7.noarch 26/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-5.16.3-299.el7_9.x86_64 27/31
m-k8s-1.20:
m-k8s-1.20: Installing : gpm-libs-1.20.7-6.el7.x86_64 28/31
m-k8s-1.20:
m-k8s-1.20: Installing : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 29/31
m-k8s-1.20:
m-k8s-1.20: Installing : 2:vim-common-7.4.629-8.el7_9.x86_64 30/31
m-k8s-1.20:
m-k8s-1.20: Installing : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 31/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-HTTP-Tiny-0.033-3.el7.noarch 1/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-threads-shared-1.43-6.el7.x86_64 2/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Storable-2.45-3.el7.x86_64 3/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Exporter-5.68-3.el7.noarch 4/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-constant-1.27-2.el7.noarch 5/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-PathTools-3.40-5.el7.x86_64 6/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-macros-5.16.3-299.el7_9.x86_64 7/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 8/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-parent-0.225-244.el7.noarch 9/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Socket-2.010-5.el7.x86_64 10/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 11/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-File-Temp-0.23.01-3.el7.noarch 12/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-Pod-Simple-3.28-4.el7.noarch 13/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Time-Local-1.2300-2.el7.noarch 14/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 15/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Carp-1.26-244.el7.noarch 16/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:vim-common-7.4.629-8.el7_9.x86_64 17/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Scalar-List-Utils-1.27-248.el7.x86_64 18/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Pod-Usage-1.63-3.el7.noarch 19/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Encode-2.51-7.el7.x86_64 20/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Pod-Perldoc-3.20-4.el7.noarch 21/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-podlators-2.5.1-3.el7.noarch 22/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-5.16.3-299.el7_9.x86_64 23/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-File-Path-2.09-2.el7.noarch 24/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-threads-1.87-4.el7.x86_64 25/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 26/31
m-k8s-1.20:
m-k8s-1.20: Verifying : gpm-libs-1.20.7-6.el7.x86_64 27/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Filter-1.49-3.el7.x86_64 28/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Getopt-Long-2.40-3.el7.noarch 29/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Text-ParseWords-3.29-4.el7.noarch 30/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-libs-5.16.3-299.el7_9.x86_64 31/31
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: vim-enhanced.x86_64 2:7.4.629-8.el7_9
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: gpm-libs.x86_64 0:1.20.7-6.el7
m-k8s-1.20: perl.x86_64 4:5.16.3-299.el7_9
m-k8s-1.20: perl-Carp.noarch 0:1.26-244.el7
m-k8s-1.20: perl-Encode.x86_64 0:2.51-7.el7
m-k8s-1.20: perl-Exporter.noarch 0:5.68-3.el7
m-k8s-1.20: perl-File-Path.noarch 0:2.09-2.el7
m-k8s-1.20: perl-File-Temp.noarch 0:0.23.01-3.el7
m-k8s-1.20: perl-Filter.x86_64 0:1.49-3.el7
m-k8s-1.20: perl-Getopt-Long.noarch 0:2.40-3.el7
m-k8s-1.20: perl-HTTP-Tiny.noarch 0:0.033-3.el7
m-k8s-1.20: perl-PathTools.x86_64 0:3.40-5.el7
m-k8s-1.20: perl-Pod-Escapes.noarch 1:1.04-299.el7_9
m-k8s-1.20: perl-Pod-Perldoc.noarch 0:3.20-4.el7
m-k8s-1.20: perl-Pod-Simple.noarch 1:3.28-4.el7
m-k8s-1.20: perl-Pod-Usage.noarch 0:1.63-3.el7
m-k8s-1.20: perl-Scalar-List-Utils.x86_64 0:1.27-248.el7
m-k8s-1.20: perl-Socket.x86_64 0:2.010-5.el7
m-k8s-1.20: perl-Storable.x86_64 0:2.45-3.el7
m-k8s-1.20: perl-Text-ParseWords.noarch 0:3.29-4.el7
m-k8s-1.20: perl-Time-HiRes.x86_64 4:1.9725-3.el7
m-k8s-1.20: perl-Time-Local.noarch 0:1.2300-2.el7
m-k8s-1.20: perl-constant.noarch 0:1.27-2.el7
m-k8s-1.20: perl-libs.x86_64 4:5.16.3-299.el7_9
m-k8s-1.20: perl-macros.x86_64 4:5.16.3-299.el7_9
m-k8s-1.20: perl-parent.noarch 1:0.225-244.el7
m-k8s-1.20: perl-podlators.noarch 0:2.5.1-3.el7
m-k8s-1.20: perl-threads.x86_64 0:1.87-4.el7
m-k8s-1.20: perl-threads-shared.x86_64 0:1.43-6.el7
m-k8s-1.20: vim-common.x86_64 2:7.4.629-8.el7_9
m-k8s-1.20: vim-filesystem.x86_64 2:7.4.629-8.el7_9
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.navercorp.com
m-k8s-1.20: * epel: fedora.ipserverone.com
m-k8s-1.20: * extras: mirror.navercorp.com
m-k8s-1.20: * updates: mirror.navercorp.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package git.x86_64 0:1.8.3.1-23.el7_8 will be installed
m-k8s-1.20: --> Processing Dependency: perl-Git = 1.8.3.1-23.el7_8 for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: rsync for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Term::ReadKey) for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Git) for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Error) for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Error.noarch 1:0.17020-2.el7 will be installed
m-k8s-1.20: ---> Package perl-Git.noarch 0:1.8.3.1-23.el7_8 will be installed
m-k8s-1.20: ---> Package perl-TermReadKey.x86_64 0:2.30-20.el7 will be installed
m-k8s-1.20: ---> Package rsync.x86_64 0:3.1.2-10.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: git x86_64 1.8.3.1-23.el7_8 base 4.4 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: perl-Error noarch 1:0.17020-2.el7 base 32 k
m-k8s-1.20: perl-Git noarch 1.8.3.1-23.el7_8 base 56 k
m-k8s-1.20: perl-TermReadKey x86_64 2.30-20.el7 base 31 k
m-k8s-1.20: rsync x86_64 3.1.2-10.el7 base 404 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package (+4 Dependent packages)
m-k8s-1.20: Total download size: 4.9 M
m-k8s-1.20: Installed size: 23 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 8.9 MB/s | 4.9 MB 00:00
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : 1:perl-Error-0.17020-2.el7.noarch 1/5
m-k8s-1.20:
m-k8s-1.20: Installing : rsync-3.1.2-10.el7.x86_64 2/5
m-k8s-1.20:
m-k8s-1.20: Installing : perl-TermReadKey-2.30-20.el7.x86_64 3/5
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
m-k8s-1.20:
m-k8s-1.20: Installing : git-1.8.3.1-23.el7_8.x86_64 5/5
m-k8s-1.20:
m-k8s-1.20: Verifying : git-1.8.3.1-23.el7_8.x86_64 1/5
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-Error-0.17020-2.el7.noarch 2/5
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-TermReadKey-2.30-20.el7.x86_64 3/5
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
m-k8s-1.20:
m-k8s-1.20: Verifying : rsync-3.1.2-10.el7.x86_64 5/5
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: git.x86_64 0:1.8.3.1-23.el7_8
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: perl-Error.noarch 1:0.17020-2.el7 perl-Git.noarch 0:1.8.3.1-23.el7_8
m-k8s-1.20: perl-TermReadKey.x86_64 0:2.30-20.el7 rsync.x86_64 0:3.1.2-10.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.navercorp.com
m-k8s-1.20: * epel: mirrors.bestthaihost.com
m-k8s-1.20: * extras: mirror.navercorp.com
m-k8s-1.20: * updates: mirror.navercorp.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package containerd.io.x86_64 0:1.3.9-3.1.el7 will be installed
m-k8s-1.20: --> Processing Dependency: container-selinux >= 2:2.74 for package: containerd.io-1.3.9-3.1.el7.x86_64
m-k8s-1.20: ---> Package docker-ce.x86_64 3:19.03.14-3.el7 will be installed
m-k8s-1.20: --> Processing Dependency: libcgroup for package: 3:docker-ce-19.03.14-3.el7.x86_64
m-k8s-1.20: ---> Package docker-ce-cli.x86_64 1:19.03.14-3.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package container-selinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed
m-k8s-1.20: --> Processing Dependency: policycoreutils-python for package: 2:container-selinux-2.119.2-1.911c772.el7_8.noarch
m-k8s-1.20: ---> Package libcgroup.x86_64 0:0.41-21.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package policycoreutils-python.x86_64 0:2.5-34.el7 will be installed
m-k8s-1.20: --> Processing Dependency: setools-libs >= 3.3.8-4 for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libsemanage-python >= 2.5-14 for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: audit-libs-python >= 2.1.3-4 for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: python-IPy for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.4)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.2)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libapol.so.4(VERS_4.0)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: checkpolicy for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libqpol.so.1()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libapol.so.4()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package audit-libs-python.x86_64 0:2.8.5-4.el7 will be installed
m-k8s-1.20: ---> Package checkpolicy.x86_64 0:2.5-8.el7 will be installed
m-k8s-1.20: ---> Package libsemanage-python.x86_64 0:2.5-14.el7 will be installed
m-k8s-1.20: ---> Package python-IPy.noarch 0:0.75-6.el7 will be installed
m-k8s-1.20: ---> Package setools-libs.x86_64 0:3.3.8-4.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: containerd.io x86_64 1.3.9-3.1.el7 docker-ce-stable 29 M
m-k8s-1.20: docker-ce x86_64 3:19.03.14-3.el7 docker-ce-stable 24 M
m-k8s-1.20: docker-ce-cli x86_64 1:19.03.14-3.el7 docker-ce-stable 38 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: audit-libs-python x86_64 2.8.5-4.el7 base 76 k
m-k8s-1.20: checkpolicy x86_64 2.5-8.el7 base 295 k
m-k8s-1.20: container-selinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k
m-k8s-1.20: libcgroup x86_64 0.41-21.el7 base 66 k
m-k8s-1.20: libsemanage-python x86_64 2.5-14.el7 base 113 k
m-k8s-1.20: policycoreutils-python x86_64 2.5-34.el7 base 457 k
m-k8s-1.20: python-IPy noarch 0.75-6.el7 base 32 k
m-k8s-1.20: setools-libs x86_64 3.3.8-4.el7 base 620 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 3 Packages (+8 Dependent packages)
m-k8s-1.20: Total download size: 93 M
m-k8s-1.20: Installed size: 393 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: warning: /var/cache/yum/x86_64/7/docker-ce-stable/packages/docker-ce-19.03.14-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
m-k8s-1.20: Public key for docker-ce-19.03.14-3.el7.x86_64.rpm is not installed
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 14 MB/s | 93 MB 00:06
m-k8s-1.20: Retrieving key from https://download.docker.com/linux/centos/gpg
m-k8s-1.20: Importing GPG key 0x621E9F35:
m-k8s-1.20: Userid : "Docker Release (CE rpm) <docker@docker.com>"
m-k8s-1.20: Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
m-k8s-1.20: From : https://download.docker.com/linux/centos/gpg
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : libcgroup-0.41-21.el7.x86_64 1/11
m-k8s-1.20:
m-k8s-1.20: Installing : setools-libs-3.3.8-4.el7.x86_64 2/11
m-k8s-1.20:
m-k8s-1.20: Installing : 1:docker-ce-cli-19.03.14-3.el7.x86_64 3/11
m-k8s-1.20:
m-k8s-1.20: Installing : audit-libs-python-2.8.5-4.el7.x86_64 4/11
m-k8s-1.20:
m-k8s-1.20: Installing : python-IPy-0.75-6.el7.noarch 5/11
m-k8s-1.20:
m-k8s-1.20: Installing : libsemanage-python-2.5-14.el7.x86_64 6/11
m-k8s-1.20:
m-k8s-1.20: Installing : checkpolicy-2.5-8.el7.x86_64 7/11
m-k8s-1.20:
m-k8s-1.20: Installing : policycoreutils-python-2.5-34.el7.x86_64 8/11
m-k8s-1.20:
m-k8s-1.20: Installing : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 9/11
m-k8s-1.20:
m-k8s-1.20: Installing : containerd.io-1.3.9-3.1.el7.x86_64 10/11
m-k8s-1.20:
m-k8s-1.20: Installing : 3:docker-ce-19.03.14-3.el7.x86_64 11/11
m-k8s-1.20:
m-k8s-1.20: Verifying : checkpolicy-2.5-8.el7.x86_64 1/11
m-k8s-1.20:
m-k8s-1.20: Verifying : 3:docker-ce-19.03.14-3.el7.x86_64 2/11
m-k8s-1.20:
m-k8s-1.20: Verifying : containerd.io-1.3.9-3.1.el7.x86_64 3/11
m-k8s-1.20:
m-k8s-1.20: Verifying : libsemanage-python-2.5-14.el7.x86_64 4/11
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 5/11
m-k8s-1.20:
m-k8s-1.20: Verifying : python-IPy-0.75-6.el7.noarch 6/11
m-k8s-1.20:
m-k8s-1.20: Verifying : policycoreutils-python-2.5-34.el7.x86_64 7/11
m-k8s-1.20:
m-k8s-1.20: Verifying : audit-libs-python-2.8.5-4.el7.x86_64 8/11
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:docker-ce-cli-19.03.14-3.el7.x86_64 9/11
m-k8s-1.20:
m-k8s-1.20: Verifying : setools-libs-3.3.8-4.el7.x86_64 10/11
m-k8s-1.20:
m-k8s-1.20: Verifying : libcgroup-0.41-21.el7.x86_64 11/11
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: containerd.io.x86_64 0:1.3.9-3.1.el7 docker-ce.x86_64 3:19.03.14-3.el7
m-k8s-1.20: docker-ce-cli.x86_64 1:19.03.14-3.el7
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: audit-libs-python.x86_64 0:2.8.5-4.el7
m-k8s-1.20: checkpolicy.x86_64 0:2.5-8.el7
m-k8s-1.20: container-selinux.noarch 2:2.119.2-1.911c772.el7_8
m-k8s-1.20: libcgroup.x86_64 0:0.41-21.el7
m-k8s-1.20: libsemanage-python.x86_64 0:2.5-14.el7
m-k8s-1.20: policycoreutils-python.x86_64 0:2.5-34.el7
m-k8s-1.20: python-IPy.noarch 0:0.75-6.el7
m-k8s-1.20: setools-libs.x86_64 0:3.3.8-4.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.navercorp.com
m-k8s-1.20: * epel: fedora.ipserverone.com
m-k8s-1.20: * extras: mirror.navercorp.com
m-k8s-1.20: * updates: mirror.navercorp.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package kubeadm.x86_64 0:1.20.2-0 will be installed
m-k8s-1.20: --> Processing Dependency: kubernetes-cni >= 0.8.6 for package: kubeadm-1.20.2-0.x86_64
m-k8s-1.20: --> Processing Dependency: cri-tools >= 1.13.0 for package: kubeadm-1.20.2-0.x86_64
m-k8s-1.20: ---> Package kubectl.x86_64 0:1.20.2-0 will be installed
m-k8s-1.20: ---> Package kubelet.x86_64 0:1.20.2-0 will be installed
m-k8s-1.20: --> Processing Dependency: socat for package: kubelet-1.20.2-0.x86_64
m-k8s-1.20: --> Processing Dependency: conntrack for package: kubelet-1.20.2-0.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package conntrack-tools.x86_64 0:1.4.4-7.el7 will be installed
m-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.1)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0(LIBNETFILTER_CTHELPER_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_queue.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: ---> Package cri-tools.x86_64 0:1.13.0-0 will be installed
m-k8s-1.20: ---> Package kubernetes-cni.x86_64 0:0.8.7-0 will be installed
m-k8s-1.20: ---> Package socat.x86_64 0:1.7.3.2-2.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package libnetfilter_cthelper.x86_64 0:1.0.0-11.el7 will be installed
m-k8s-1.20: ---> Package libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7 will be installed
m-k8s-1.20: ---> Package libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: kubeadm x86_64 1.20.2-0 kubernetes 8.3 M
m-k8s-1.20: kubectl x86_64 1.20.2-0 kubernetes 8.5 M
m-k8s-1.20: kubelet x86_64 1.20.2-0 kubernetes 20 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: conntrack-tools x86_64 1.4.4-7.el7 base 187 k
m-k8s-1.20: cri-tools x86_64 1.13.0-0 kubernetes 5.1 M
m-k8s-1.20: kubernetes-cni x86_64 0.8.7-0 kubernetes 19 M
m-k8s-1.20: libnetfilter_cthelper x86_64 1.0.0-11.el7 base 18 k
m-k8s-1.20: libnetfilter_cttimeout x86_64 1.0.0-7.el7 base 18 k
m-k8s-1.20: libnetfilter_queue x86_64 1.0.2-2.el7_2 base 23 k
m-k8s-1.20: socat x86_64 1.7.3.2-2.el7 base 290 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 3 Packages (+7 Dependent packages)
m-k8s-1.20: Total download size: 61 M
m-k8s-1.20: Installed size: 262 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 8.7 MB/s | 61 MB 00:07
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : libnetfilter_cthelper-1.0.0-11.el7.x86_64 1/10
m-k8s-1.20:
m-k8s-1.20: Installing : socat-1.7.3.2-2.el7.x86_64 2/10
m-k8s-1.20:
m-k8s-1.20: Installing : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 3/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubectl-1.20.2-0.x86_64 4/10
m-k8s-1.20:
m-k8s-1.20: Installing : libnetfilter_queue-1.0.2-2.el7_2.x86_64 5/10
m-k8s-1.20:
m-k8s-1.20: Installing : conntrack-tools-1.4.4-7.el7.x86_64 6/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubernetes-cni-0.8.7-0.x86_64 7/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubelet-1.20.2-0.x86_64 8/10
m-k8s-1.20:
m-k8s-1.20: Installing : cri-tools-1.13.0-0.x86_64 9/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubeadm-1.20.2-0.x86_64 10/10
m-k8s-1.20:
m-k8s-1.20: Verifying : conntrack-tools-1.4.4-7.el7.x86_64 1/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubernetes-cni-0.8.7-0.x86_64 2/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubelet-1.20.2-0.x86_64 3/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubeadm-1.20.2-0.x86_64 4/10
m-k8s-1.20:
m-k8s-1.20: Verifying : cri-tools-1.13.0-0.x86_64 5/10
m-k8s-1.20:
m-k8s-1.20: Verifying : libnetfilter_queue-1.0.2-2.el7_2.x86_64 6/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubectl-1.20.2-0.x86_64 7/10
m-k8s-1.20:
m-k8s-1.20: Verifying : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 8/10
m-k8s-1.20:
m-k8s-1.20: Verifying : socat-1.7.3.2-2.el7.x86_64 9/10
m-k8s-1.20:
m-k8s-1.20: Verifying : libnetfilter_cthelper-1.0.0-11.el7.x86_64 10/10
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: kubeadm.x86_64 0:1.20.2-0 kubectl.x86_64 0:1.20.2-0 kubelet.x86_64 0:1.20.2-0
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: conntrack-tools.x86_64 0:1.4.4-7.el7
m-k8s-1.20: cri-tools.x86_64 0:1.13.0-0
m-k8s-1.20: kubernetes-cni.x86_64 0:0.8.7-0
m-k8s-1.20: libnetfilter_cthelper.x86_64 0:1.0.0-11.el7
m-k8s-1.20: libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7
m-k8s-1.20: libnetfilter_queue.x86_64 0:1.0.2-2.el7_2
m-k8s-1.20: socat.x86_64 0:1.7.3.2-2.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
m-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /var/folders/57/629sgzyn5wng9wyrwry2325m0000gn/T/vagrant-shell20210909-63680-1bksjds.sh
m-k8s-1.20: I0909 15:14:24.779613 3535 version.go:251] remote version is much newer: v1.22.1; falling back to: stable-1.20
m-k8s-1.20: [init] Using Kubernetes version: v1.20.10
m-k8s-1.20: [preflight] Running pre-flight checks
m-k8s-1.20: [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
m-k8s-1.20: [preflight] Pulling images required for setting up a Kubernetes cluster
m-k8s-1.20: [preflight] This might take a minute or two, depending on the speed of your internet connection
m-k8s-1.20: [preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
m-k8s-1.20: [certs] Using certificateDir folder "/etc/kubernetes/pki"
m-k8s-1.20: [certs] Generating "ca" certificate and key
m-k8s-1.20: [certs] Generating "apiserver" certificate and key
m-k8s-1.20: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local m-k8s] and IPs [10.96.0.1 192.168.1.10]
m-k8s-1.20: [certs] Generating "apiserver-kubelet-client" certificate and key
m-k8s-1.20: [certs] Generating "front-proxy-ca" certificate and key
m-k8s-1.20: [certs] Generating "front-proxy-client" certificate and key
m-k8s-1.20: [certs] Generating "etcd/ca" certificate and key
m-k8s-1.20: [certs] Generating "etcd/server" certificate and key
m-k8s-1.20: [certs] etcd/server serving cert is signed for DNS names [localhost m-k8s] and IPs [192.168.1.10 127.0.0.1 ::1]
m-k8s-1.20: [certs] Generating "etcd/peer" certificate and key
m-k8s-1.20: [certs] etcd/peer serving cert is signed for DNS names [localhost m-k8s] and IPs [192.168.1.10 127.0.0.1 ::1]
m-k8s-1.20: [certs] Generating "etcd/healthcheck-client" certificate and key
m-k8s-1.20: [certs] Generating "apiserver-etcd-client" certificate and key
m-k8s-1.20: [certs] Generating "sa" key and public key
m-k8s-1.20: [kubeconfig] Using kubeconfig folder "/etc/kubernetes"
m-k8s-1.20: [kubeconfig] Writing "admin.conf" kubeconfig file
m-k8s-1.20: [kubeconfig] Writing "kubelet.conf" kubeconfig file
m-k8s-1.20: [kubeconfig] Writing "controller-manager.conf" kubeconfig file
m-k8s-1.20: [kubeconfig] Writing "scheduler.conf" kubeconfig file
m-k8s-1.20: [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
m-k8s-1.20: [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
m-k8s-1.20: [kubelet-start] Starting the kubelet
m-k8s-1.20: [control-plane] Using manifest folder "/etc/kubernetes/manifests"
m-k8s-1.20: [control-plane] Creating static Pod manifest for "kube-apiserver"
m-k8s-1.20: [control-plane] Creating static Pod manifest for "kube-controller-manager"
m-k8s-1.20: [control-plane] Creating static Pod manifest for "kube-scheduler"
m-k8s-1.20: [etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
m-k8s-1.20: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
m-k8s-1.20: [apiclient] All control plane components are healthy after 14.502570 seconds
m-k8s-1.20: [upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
m-k8s-1.20: [kubelet] Creating a ConfigMap "kubelet-config-1.20" in namespace kube-system with the configuration for the kubelets in the cluster
m-k8s-1.20: [upload-certs] Skipping phase. Please see --upload-certs
m-k8s-1.20: [mark-control-plane] Marking the node m-k8s as control-plane by adding the labels "node-role.kubernetes.io/master=''" and "node-role.kubernetes.io/control-plane='' (deprecated)"
m-k8s-1.20: [mark-control-plane] Marking the node m-k8s as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
m-k8s-1.20: [bootstrap-token] Using token: 123456.1234567890123456
m-k8s-1.20: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
m-k8s-1.20: [bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
m-k8s-1.20: [kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
m-k8s-1.20: [addons] Applied essential addon: CoreDNS
m-k8s-1.20: [addons] Applied essential addon: kube-proxy
m-k8s-1.20:
m-k8s-1.20: Your Kubernetes control-plane has initialized successfully!
m-k8s-1.20:
m-k8s-1.20: To start using your cluster, you need to run the following as a regular user:
m-k8s-1.20:
m-k8s-1.20: mkdir -p $HOME/.kube
m-k8s-1.20: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
m-k8s-1.20: sudo chown $(id -u):$(id -g) $HOME/.kube/config
m-k8s-1.20:
m-k8s-1.20: Alternatively, if you are the root user, you can run:
m-k8s-1.20:
m-k8s-1.20: export KUBECONFIG=/etc/kubernetes/admin.conf
m-k8s-1.20:
m-k8s-1.20: You should now deploy a pod network to the cluster.
m-k8s-1.20: Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
m-k8s-1.20: https://kubernetes.io/docs/concepts/cluster-administration/addons/
m-k8s-1.20:
m-k8s-1.20: Then you can join any number of worker nodes by running the following on each as root:
m-k8s-1.20:
m-k8s-1.20: kubeadm join 192.168.1.10:6443 --token 123456.1234567890123456 \
m-k8s-1.20: --discovery-token-ca-cert-hash sha256:645e2827e93a86f4fe0caea33a5b59da8a466d14e5b2c009389e4723a01e5152
m-k8s-1.20: configmap/calico-config created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created
m-k8s-1.20: clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
m-k8s-1.20: clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
m-k8s-1.20: clusterrole.rbac.authorization.k8s.io/calico-node created
m-k8s-1.20: clusterrolebinding.rbac.authorization.k8s.io/calico-node created
m-k8s-1.20: daemonset.apps/calico-node created
m-k8s-1.20: serviceaccount/calico-node created
m-k8s-1.20: deployment.apps/calico-kube-controllers created
m-k8s-1.20: serviceaccount/calico-kube-controllers created
m-k8s-1.20: poddisruptionbudget.policy/calico-kube-controllers created
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.navercorp.com
m-k8s-1.20: * epel: fedora.ipserverone.com
m-k8s-1.20: * extras: mirror.navercorp.com
m-k8s-1.20: * updates: mirror.navercorp.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package bash-completion.noarch 1:2.1-8.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: bash-completion noarch 1:2.1-8.el7 base 87 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package
m-k8s-1.20: Total download size: 87 k
m-k8s-1.20: Installed size: 263 k
m-k8s-1.20: Downloading packages:
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : 1:bash-completion-2.1-8.el7.noarch 1/1
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:bash-completion-2.1-8.el7.noarch 1/1
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: bash-completion.noarch 1:2.1-8.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Cloning into '_Lecture_k8s_starter.kit'...
==> w1-k8s-1.20: Importing base box 'sysnet4admin/CentOS-k8s'...
==> w1-k8s-1.20: Matching MAC address for NAT networking...
==> w1-k8s-1.20: Checking if box 'sysnet4admin/CentOS-k8s' version '0.7.4' is up to date...
==> w1-k8s-1.20: Setting the name of the VM: w1-k8s-1.20(github_SysNet4Admin)
==> w1-k8s-1.20: Clearing any previously set network interfaces...
==> w1-k8s-1.20: Preparing network interfaces based on configuration...
w1-k8s-1.20: Adapter 1: nat
w1-k8s-1.20: Adapter 2: hostonly
==> w1-k8s-1.20: Forwarding ports...
w1-k8s-1.20: 22 (guest) => 60101 (host) (adapter 1)
==> w1-k8s-1.20: Running 'pre-boot' VM customizations...
==> w1-k8s-1.20: Booting VM...
==> w1-k8s-1.20: Waiting for machine to boot. This may take a few minutes...
w1-k8s-1.20: SSH address: 127.0.0.1:60101
w1-k8s-1.20: SSH username: vagrant
w1-k8s-1.20: SSH auth method: private key
w1-k8s-1.20: Warning: Connection reset. Retrying...
w1-k8s-1.20: Warning: Remote connection disconnect. Retrying...
w1-k8s-1.20: Warning: Connection reset. Retrying...
w1-k8s-1.20: Warning: Remote connection disconnect. Retrying...
w1-k8s-1.20: Warning: Connection reset. Retrying...
w1-k8s-1.20: Warning: Remote connection disconnect. Retrying...
w1-k8s-1.20:
w1-k8s-1.20: Vagrant insecure key detected. Vagrant will automatically replace
w1-k8s-1.20: this with a newly generated keypair for better security.
w1-k8s-1.20:
w1-k8s-1.20: Inserting generated public key within guest...
w1-k8s-1.20: Removing insecure key from the guest if it's present...
w1-k8s-1.20: Key inserted! Disconnecting and reconnecting using new SSH key...
==> w1-k8s-1.20: Machine booted and ready!
==> w1-k8s-1.20: Checking for guest additions in VM...
w1-k8s-1.20: The guest additions on this VM do not match the installed version of
w1-k8s-1.20: VirtualBox! In most cases this is fine, but in rare cases it can
w1-k8s-1.20: prevent things such as shared folders from working properly. If you see
w1-k8s-1.20: shared folder errors, please make sure the guest additions within the
w1-k8s-1.20: virtual machine match the version of VirtualBox you have installed on
w1-k8s-1.20: your host and reload your VM.
w1-k8s-1.20:
w1-k8s-1.20: Guest Additions Version: 5.2.12
w1-k8s-1.20: VirtualBox Version: 6.1
==> w1-k8s-1.20: Setting hostname...
==> w1-k8s-1.20: Configuring and enabling network interfaces...
==> w1-k8s-1.20: Running provisioner: shell...
w1-k8s-1.20: Running: /var/folders/57/629sgzyn5wng9wyrwry2325m0000gn/T/vagrant-shell20210909-63680-1pjemxi.sh
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Determining fastest mirrors
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
w1-k8s-1.20: Package yum-utils-1.1.31-54.el7_8.noarch already installed and latest version
w1-k8s-1.20: Nothing to do
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
w1-k8s-1.20: grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
w1-k8s-1.20: repo saved to /etc/yum.repos.d/docker-ce.repo
==> w1-k8s-1.20: Running provisioner: shell...
w1-k8s-1.20: Running: /var/folders/57/629sgzyn5wng9wyrwry2325m0000gn/T/vagrant-shell20210909-63680-18ob6cr.sh
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
w1-k8s-1.20: Resolving Dependencies
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package epel-release.noarch 0:7-11 will be installed
w1-k8s-1.20: --> Finished Dependency Resolution
w1-k8s-1.20:
w1-k8s-1.20: Dependencies Resolved
w1-k8s-1.20:
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Package Arch Version Repository Size
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Installing:
w1-k8s-1.20: epel-release noarch 7-11 extras 15 k
w1-k8s-1.20:
w1-k8s-1.20: Transaction Summary
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Install 1 Package
w1-k8s-1.20: Total download size: 15 k
w1-k8s-1.20: Installed size: 24 k
w1-k8s-1.20: Downloading packages:
w1-k8s-1.20: Running transaction check
w1-k8s-1.20: Running transaction test
w1-k8s-1.20: Transaction test succeeded
w1-k8s-1.20: Running transaction
w1-k8s-1.20: Installing : epel-release-7-11.noarch 1/1
w1-k8s-1.20:
w1-k8s-1.20: Verifying : epel-release-7-11.noarch 1/1
w1-k8s-1.20:
w1-k8s-1.20:
w1-k8s-1.20: Installed:
w1-k8s-1.20: epel-release.noarch 0:7-11
w1-k8s-1.20: Complete!
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * epel: ftp.iij.ad.jp
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
아...생각을 해보니..epel이나 다른 저장소 업데이트도 있는데..거기를 넘어갔다면...현재 사용하시는 네트워크가 gcr.io를 쓰지 못하도록 막을수도 있나..? l7 firewall을 거치신다면 가능하던가...
해당 내용등을 좀 보셔야 할 꺼 같아요.
Last failed login: Fri Dec 6 07:43:55 KST 2019 on pts/0
There was 1 failed login attempt since the last successful login.
[root@m-k8s ~]# k get node
NAME STATUS ROLES AGE VERSION
m-k8s Ready control-plane,master 28m v1.20.2
w1-k8s Ready <none> 25m v1.20.2
w2-k8s Ready <none> 22m v1.20.2
w3-k8s Ready <none> 19m v1.20.2
로그 자체가 특정 키워드가 없는거라서...
없으실꺼 같습니다. 네트워크 관련일꺼 같다 정도라서요
환경(위치) 변경 & 재 설치(또는 포맷이요)가 제일 좋으실꺼 같습니다.
0
안녕하세요
k8s.gcr.io 라는 저장소(Registry)에서 이미지를 받아올 수 없다는 내용인데요..
음...장애났나..? 인터넷이 잘 되신다면 일시적인 저장소 장애처럼 보여지는데, 다 지우고 저녁때 다시 한번 시도 부탁드려도 될까요?
저 저장소를 제가 관리할 수 있는 영역이 아니라서요 ㅠㅠ
해보시고 말씀 부탁드립니다.
감사합니다.
조훈 드림.
음..오전부터 그랬다면, 음 잠시만요 제가 하나만 올려볼께요.
제가 된다면 내부적인 호스트(랩탑)+가상 머신(VM) 네트워크 이슈라고 볼수도 있어서요 (이미 box는 내려받은 상태에서 그건 skip되었다고 보고요.잠시만 기다려주세요!